Sunday, 17 June 2012

Oscilloscope Xminilab-B Based on the Microcontroller Atmel AVR ATXMEGA32A4

This is an Oscilloscope Xminilab-B on the microcontroller Atmel AVR ATXMEGA32A4 electro suite. As we found in rlocman.ru, The Gabotronis company produces debug board to explore the possibilities of the family of microcontrollers Atmel XMEGA, which is a comprehensive mixed-signal oscilloscope and spectrum analyzer with arbitrary waveform generator. Additionally, there are two digital channels for using the device as a logic analyzer.

Distinctive features of the device:
For data visualization, user interface and organizing the control menu uses a graphical LCD display with a resolution of 128 × 128 pixels. All electronic components and controls are placed on double-sided printed circuit board.

  •  Base unit – Microcontroller ATXMEGA32A4: 
           o Flash-memory programs – 32 KByte;
           o SRAM – 4 KB;
           o EEPROM – 1KByte;
  •  Modes: 
           o Mixed Signal Oscilloscopes;
           o Arbitrary waveform generator;
           o Spectrum analyzer;
  •  Simultaneous operation of the generator and oscilloscope 
  • Graphic LCD display with fluorescent backlight, resolution 128 × 128 pixels; 
  • PDI interface for programming and debugging; 
  • RS-232 interface for communication with a PC; 
  • Control with two encoders and 7-button keypad; 
  • Audible (buzzer); 
  • Consumption of 120 mA; 
  • Power from an external source 6 – 9 V

Specifications of measuring instrument:
  •     Oscilloscope:
          o 1 analog channel;
          o 2 Digital channel (level – 3.5);
          o Analog bandwidth – 2 MHz;
          o Maximum sampling rate – 16 Msps;
          o Resolution of the ADC – 8 bit;
          o Analog synchronization and external digital sync;
          o Horizontal and vertical cursors;
          o Input Impedance – 1 M;
          o Buffer size – 256;
          o Maximum input voltage – ± 25 V (using a 1:10 divider input range ± 250 V);
  •     Arbitrary waveform generator:
          o 1 analog channel;
          o Maximum speed of converting – 1 Msps;
          o Resolution – 8 bits;
          o Low output impedance;
          o Buffer size – 256;
          o Maximum output voltage – ± 3.5 V.



 Source : http://www.rlocman.ru/shem/schematics.html?di=107108

0 comments:

Post a Comment

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | Bluehost Review