Thermaltake Level 10 GT Snow with Three Super Large Fans

Level 10 GT is a top class chassis from Thermaltake. This time, Level 10 GT comes with a white bandage.
The specifications are not much different than the series Level 10 GT previous , still with three super large 200 mm fans on the front and side for intake as well as a fan  at the top for exhaust. Fan's sized 140 mm also been added on the back side to help remove heat. As a sweetener view, three of 200 mm fans are equipped with LED features and Colorshift three colors (red, green, blue).
This chassis/casing is also equipped with a good security system because System Security Lock feature to ensure the security of hardware in it. On the left side of the casing there is a knob to adjust the direction of the wind generated from the fan side. That way, you can set the direction of the wind to upper, middle or bottom.
The casing has a five hotswap hard disk bay. To remove the hard disk, press the button located on the front side and then pull the hard disk cage from the left side. The button also serves as a safety net so that the hard disk is not easily dislodged.
Other features are a air filter located in front, left side, and bottom. They can be removed easily for cleaning. On the left side of the casing also has a headset holder to hang the headset.

Stay abreast of trends, this case provides two internal USB 3.0 port on front panel. In addition, there are four USB 2.0 ports, an e-SATA port, and HD audio port. The casing is also able to accommodate water cooling or radiator sized 240 mm. Three water cooling holes are also available on the back side.
Eight expansion slots in the casing allows you to use the system 3-way SLI or CrossFireX graphics card with a length of up to 360 mm. Cable management is also because because of the cable holder.
The advantages of Thermaltake Level 10 GT Snow are available two internal 3.0 on the front side, HotSwap HDD to facilitate the laying of hard disk, there are an air filter to maintain the cleanliness of hardware in it, elegant design, and equipped with new features and provide adequate security through its key.

Specifications:

Material: Iron, Plastic

5.25" Drive Bay: 4

3.5" Drive Bay: 6

Expansion Slots: 8

Cooling System: Front (intaker) 200 mm LED fan

Top (exhaust) 200 mm LED fan

Side (intake) 200 mm LED fan

Rear (exhaust) 140 mm LED fan

Bottom (intake) 120 mm fan (optional)

Power Supply: Bottom Standard ATx PSII

Posted in: Casing, Computers